Return to site

How to Clear Dell Printer’s Print Head Nozzle?

Dell Printer Support Australia +61-283173391

· Printer,Tech Support

Is your Dell Printer printing faint, incomplete, or streaked documents? If yes! Then this might because of your dried print head. A dried print head or lack of use leads to the clogging. The print head has a tiny hole through which ink sprayed into the paper, clogged ink get stuck into the tiny hole and causes these sort of issue. Cleaning this path again enables you to print the paper without any errors. You can do this either by built-in self-cleaning software or manually if former doesn’t work.

Dell Printer Helpline Australia

So here Dell Printer Support Number Australia presents you with the complete solution by which you can readily accomplish this task. Just you need to follow the entire steps.

  1. Cleaning the printers through the Window.
  • Go to the left side of the window and click on “Start” button, move to the “Device & Printer” followed by the control panel. Your window might show you the categories view if it does then click “View Device and Printer” below the Hardware and sound.
  • Select your printer, you will find it at the bottom of the page. If your computer uses touchpad then use it instead of the mouse.
  • Right-click on your printer’s name and then click on properties from the list. You will find it at the bottom of the list.
  • Click the “Hardware or Maintenance” tab; you will get it at the top of the window. This option may differ with the different printer’s model as you may find the self-cleaning option in “More” and “Tools” tab.  
  • Click the option which says “Clean Head or Clean Cartridges” click “OK” to proceed and then follow the on-screen instruction
  1. Clean print Head manually
  • For manual cleaning, you need to gather some items like Isopropyl alcohol, water, a bowl or pie tin, paper towels. Turn off the printer, unplug it, and remove the cartridge and print head unit.
  • Make 50/50 mixture of isopropyl alcohol and water in a cup. Shake the mixture gently; Keep the print head into the mixture for two minutes.  Take it out and keep it on the paper towel to observe the moisture. Let it live in the same position for 5 minutes.
  • Place the print head and cartridge back at their position.

These are the steps our experts have explained you. But this procedure is sensitive; a little mistake can lead to the erroneous printing. Therefore it would be prudent to perform this task under the presence of the experts. Feel free to contact our experts via toll-free Dell Printer Technical Support Australia (+61-283173391). They will not only help you with this particular issue but also provide you with a well-described solution in some other similar issue.

Read More - How to Calibrate a Dell Printer for a Better Printing?

All Posts
×

Almost done…

We just sent you an email. Please click the link in the email to confirm your subscription!

OKSubscriptions powered by Strikingly